Energy Department Launches SunShot Initiative for Solar Power

The U.S. Department of Energy announced an initiative that aims to reduce the total costs of photovoltaic solar energy systems by about 75% over the next decade. 

If successful, the so-called SunShot initiative would help make large scale solar cost-competitive with other forms of energy–without subsidies–by 2020.

The cost-competitive mark for utility-scale installations is considered to be roughly $1 a watt, which corresponds to roughly 6 cents per kilowatt-hour.

The SunShot program builds on the legacy of President Kennedy’s 1960s "moon shot" goal, which laid out a plan to regain the country’s lead in the space race and land a man on the moon. The program aims to aggressively drive innovations in the ways that solar systems are conceived, designed, manufactured and installed.

"America is in a world race to produce cost-effective, quality photovoltaics. The SunShot initiative will spur American innovations to reduce the costs of solar energy and re-establish U.S. global leadership in this growing industry," said Energy Secretary Steven Chu.

In addition to investing in improvements in cell technologies and manufacturing, the SunShot initiative will also focus on steps to streamline and digitize local permitting processes that will reduce installation and permitting costs, DOE said. See our story on how permitting costs add $2500 to solar systems.

To achieve the SunShot goal, DOE says it will work closely with partners in government, industry, research laboratories and academic institutions across the country. SunShot will work to bring down the full cost of solar–including the costs of the solar cells and installation–by focusing on four main pillars:

  1. Technologies for solar cells and arrays that convert sunlight to energy
  2. Electronics that optimize the performance of the installation
  3. Improvements in the efficiency of solar manufacturing processes
  4. Installation, design and permitting for solar energy systems.

As part of the launch of the SunShot initiative, DOE also announced $27 million in awards to nine new projects.

This funding includes support for five projects that are receiving $20 million to further develop U.S. supply chains for PV manufacturing.

  • 1366 Technologies ($3 million, Lexington, Massachusetts): The goal of this project is to further develop a new, manufacturing process that dramatically reduces the cost of producing silicon wafers for use in silicon PV modules. The Direct Wafer process delivers significant improvements in manufacturing efficiency since it does not require sawing individual wafers from blocks of silicon.
  • 3M (NYSE: MMM)($4.4 million, St. Paul, Minnesota): The goal of this project is to develop and commercialize a flexible, highly transparent Ultra Barrier Topsheet that will enable successful commercialization of flexible photovoltaic modules.
  • PPG ($3.1 million, Cheswick, Pennsylvania): The goal of this project is to develop the materials, coating designs, and manufacturing processes necessary to commercialize a new glass article for the Cadmium Telluride (CdTe) module manufacturing industry.
  • Varian Semiconductor (Nasdaq: VSEA) ($4.8 million, Gloucester, Massachusetts): The goal of this project is to reduce the cost of manufacturing interdigitated back contact cells, the most efficient silicon solar cells on the market.
  • Veeco (Nasdaq: VECO) ($4.8 million, Lowell, Massachusetts): The goal of this project is to accelerate the research and development, integration and commercialization of an innovative thin film CIGS (Copper, Indium, Gallium, Diselenide) PV multi-stage thermal deposition production system in order to manufacture cost-efficient CIGS PV solar cells.

It also includes $7 million in the latest round of funding for the National Renewable Energy Laboratory’s PV Incubator program.

  • Caelux (Pasadena, California): Caelux is developing a flexible solar cell manufacturing process and design that minimizes the amount of semiconducting material used. This has the potential to significantly improve device efficiency while dramatically reducing production costs.
  • Solexant (San Jose, California): Solexant is developing a new thin film material from substances that are non-toxic and not rare. These devices will be constructed with a nanoparticle ink that can be printed and will result in commercially viable efficiencies using scalable, low cost processes.
  • Stion (San Jose, California): Stion is developing a thin film technology that will allow two high-efficiency thin film solar devices to be stacked, allowing for much better absorption of light and power generation. The device is constructed in a way that significantly reduces cost, simplifies manufacturing and reduces materials utilization over traditional designs.
  • Crystal Solar (Santa Clara, California): Crystal Solar is developing a new technology for the fabrication, handling, processing, and packaging of very thin single crystal silicon wafers (four times thinner than standard cells). This solution uses much less silicon, eliminates many of the wasteful and expensive wafer processing steps and addresses the problem of handling very thin wafers.

Learn more about the SunShot initiative:

Website: [sorry this link is no longer available]     
(Visited 12,387 times, 30 visits today)

Comments on “Energy Department Launches SunShot Initiative for Solar Power”

  1. John Fors

    Good news for PV industry, the US and the world. Now what about the republicans who will fight the funding as deficit spending?

    Reply
  2. Beaten Down

    You forgot about feed in requirements. In Northern Indiana the power company will charge you 3cents a kilowatt for not using power. Also state and local building code enforcement officals don’t have a clue about what or where to start inspection of installations and engineering aspects.It is about time someone trys to cut threw all the BS and finally get this industry moving.Good luck you are going to need it. Also why don’t we use geothermal power like Iceland? There is enough free clean energy in yellowstone to power the whole world..I don’t get it. It would be so easy to do. Include research money to include how to start producing power from geopower sources too.

    Reply
  3. Galileo2100

    Space solar power would be a more comprehensive initiative for DOE to back. The Sunsat Act (http://gatech.edu/sunsat-act.pdf) would create a public/private “Sunsat Corporation” to build solar power satellites, aimilar to the way the Transcontinental Railroad and Comsat Acts opened transcontinental rail and communications satellite industries. We can ride the successes of these industries and again transform the world(s), which is something that the USA has a good practice of doing. Economies expand when it comes expanding time.

    Reply
  4. reiki33

    Do you suppose that any watt of solar power that would have bypassed earth whilst heading space-ward might just be another contribution to global warming that might need to be managed?

    Reply
  5. calsolareng.com

    funding and financing like this will really push solar and the like over- especially with all these big projects going through.

    Reply

Post Your Comment

Your email address will not be published. Required fields are marked *